I feel like I can see and feel the end in site. As I have been talking with my old cabinet teacher from Heartwood about going and using his shop to make my cabinets I have been chipping away at insulation and interior siding. And little by little it is starting to feel like an almost finished house inside!

The insulation I chose to use is mineral wool sold under the brand name of Roxul. I’ve been excited about this stuff for a while now as I noticed a few green builders using it in Vermont back in 2013. What are the advantages of it? It comes in board and batt form so can be used in any application that fiberglass batts would be used and in most applications where rigid foam board insulation would be used. But unlike fiberglass it is not a known carcinogen and it performs way better; The batts are much more rigid, friction fitting into cavities and not settled over time. They also do not loose their insulative value if they get wet and keep their shape and form as well, even when dunked in a bucket of water. Mice do not seem to like it much, and it is practically fire proof. It also is comparable price wise to fiber glass insulation, which is generally the cheapest insulation on the market. Compared to foam, it is a natural and inert material, not made from petroleum and with no off gassing potential. It does have a slightly lower r value than foam, which can have as high as R-7 per an inch, while roxul is about R-4.3 per an inch, but after finding out that spray foam is a fire accelerant and extremely toxic when it burns I decided I did not want that in my house.

And so I went with roxul. Insulation is a job that very few people enjoy doing; it is itchy, dusty, and messy. Yes, despite all of roxul’s “green” attributes it does still create an itchy dust that I did find irritating to my lungs if I did not wear a dust mask. But I was comforted by the roxul website and other sites that say that the roxul dust particles, although still uncomfortable, are much larger in size and so a dust mask does seem to effectively sblock them, and they are not a known carcinogen the way that fiberglass is.

I am really grateful that two of my friends came out for a day and the three of us busted out the insulation for my whole house in a single day! Take a look:

IMG_5095

Woohooo!

IMG_5101

Thank you so much Prema and Jeremiah for your help!

IMG_5103

And after a thorough sweeping and cleaning…

Oh, and did I mention that on the same day that we put in my insulation Rebecca Carpentar also came and made my electricity live?! So now I can plug in my little space heater inside my insulated house, and guess what? It warms up! And stays warm!

With insulation done I was ready to begin putting ip my interior siding! This feels like a huge step. And it felt so good to be back to working with wood after doing electrical and figuring out plumbing decisions and getting at itchy and dusty with Roxul.

Here are some pictures of the interior siding going up, which is 1×8″ pine tongue and groove. Isn’t it pretty?

IMG_5133

Thank Adam, another friend, for coming out and helping!

Each of these boards I hand sanded with a random 5″ orbital sander with 100 grit paper and then 150 grit paper. This was a decision I went back and forth about as these boards came from the mill already planed and quite beautiful and smooth to the touch. But after talking to a few people with more experience then me I was convinced that sanding would be worth it as they all said any finish I put on the wood will look better if I have sanded them. And if I don’t sand them that a finish will likely amplify any nicks or imperfections in the planing job.

IMG_5159

note the loft ceiling!! Boy did it feel good to get that covered up! I can almost sleep up there now 🙂

tv2

Me putting a board in place.

The above picture is one that Jim Bosojolie took on the day that channel 9 news from syracuse came out to take some shots and interview me! Yup, that is right. They called Maria from Hammerstone school asking if she knew of any tiny house people and she referred them to me. I was told it should be about a minute and 30 second clip that should air on February 28th. When I get the link to the clip I will make sure to post it here!

I am not done yet with the interior siding but feel like with another solid week I should be very close to or totally done. I leave for Mexico tomorrow though for 10 days of playing in the sun and waves, so that week of work will be the first full week of March! Then it will be time for the building of my stairs, my hearth, and cabinets and trim! Woohooo!! Lately I have been saying my goal is to have the house ready to start moving in on May 1st. I think I can do it. And I am determined that the house sitting gig I am in now, which will end sometime mid may, will be my last one before I move into my tiny house. Which, by the way, I have decided can no longer be just “Tiny” but needs a new name. Tiny worked for construction but feels too generic. And so I have been on a quest for a name. For a while I was leaning towards Subako, which means nest box and bee hive in Japanese, but 3 syllables felt just a little too long. Then the other day the word Cocoon came to me, which is Ma-yu in Japanese. So far people seem to like that name when I tell them it and it feels good to me. More feminine than Subako, and easier to say. I am still sitting with it for a while but I think that is going to be Tiny’s new name!

And so here is one last picture of Ma-yu glowing in the evening light on a beautiful winter snowy day.

IMG_5144